Troy-bilt 071 Uživatelský manuál

Safety • Assembly • Operation • Maintenance • Troubleshooting • Parts Lists • WarrantyWarning: This unit is equipped with an internal combustion engin

10Figure 9Now that you have set up your yard vacuum for operation, get acquainted with its controls and features. These are described below and illust

11Hose AssemblyUsed as an alternative to the nozzle to vacuum yard waste such as leaves or pine needles in hard to reach places. See Figure 9.Nozzle/

12To Empty Bag1. a. Unhook bag straps from the lower handle. b. Unsnap bag clip from the top of lower handle. See Figure 10. c. Grasp bag handle

13Yard waste such as leaves and pine needles can be vacuumed up through the nozzle for shredding. After material has been shredded by the flail blades

14WARNING: Always stop engine and disconnect spark plug wire before cleaning, lubricating or doing any kind of maintenance on your machine.Lubrication

15Drive Control Cable AdjustmentAdjust the drive control cable if the yard vacuum does not self propel with the drive control engaged, or if the unit

16Sharpening Or Replacing Chipper BladeNOTE: When tipping the unit, empty the oil and fuel tank and keep engine spark plug side up.1. Disconnect and

179. Using a 3/16” allen wrench, remove the flat head cap screws that hold the chipper blade to the impeller. These screws are accessible through the

18For repairs beyond the minor adjustments listed here, contact an authorized service dealer. 6Trouble ShootingCauseProblem RemedyEngine fails to star

19For parts and/or accessories please call 1-866-840-6483, or 1-330-558-7220.www.troybilt.comNOTES:Use this page to make notes and write down importan

2Finding and Recording Model NumberPlease do NOT return the unit to the retailer from which it was purchased, without first contacting Customer Suppor

20Model 070 / 0715354525155952649467250681622173330815512482120191815655856236547676163366560823170414464157357156980767443451113371684027353734323828

217Parts ListTo order replacement parts, contact 1-800-520-5520, 1-330-558-7220 or visit www.troybilt.com. Ref. Part No. Description1. 736-0451 Saddl

22Models 070 / 0713233ABBA391474421412212019232236374935383440424349483013502645151716254631242969327284105818111141751

237Parts ListTo order replacement parts, contact 1-800-520-5520, 1-330-558-7220 or visit www.troybilt.com. Ref. Part No. Description1. 664-04031 Bag

The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States and/or its terr

31Safety LabelsWARNINGThis symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property

42Safe Operation PracticesTraining1. Read, understand, and follow all instructions on the ma-chine and in the manual(s) before attempting to assembl

5Operation1. Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can a

6Figure 1Drive ControlSpeed ControlUpper HandleBagHose AssemblyBlower ChuteCarriage ScrewsUpper Hose Handle BracketRope GuideHandle KnobsWing NutCable

7Figure 2Figure 3Figure 4Figure 5!"ABAlign pin with this hole.Attaching The Handle1. Remove the hairpin clips from the handle brackets and remov

8Figure 66. a. Snap the hose handle first into the upper hose handle bracket and then into the lower hose handle bracket. See Figure 6. b. Lay hose

9Figure 8Attaching The Blower Chute (If Equipped)NOTE: The bag must be removed before installing the blower chute.8. a. Grasp blower chute with one h